Dear collegues,
i´m setting the procedure to evaluate the movement of the molten metal in a simple crucible furnace: reading the papers from comsol ( www.comsol.asia/paper/download...3709/quintana_presentation.pdf , www.comsol.com/paper/download/83615/roy_paper.pdf )and from internet (www.comsol.eu/paper/download/14619/Ernst_pres.pdf) i understood that the ac/dc, the moving mesh ale and the turbulent flow k-epsi module should be used. in few hours i hope to start the project by myself, so in the way to let you have a look at it. In any case, if you have knowledge about how to set the solve processing , are well accepted
Thanks in advance
Gianmarco
i´m setting the procedure to evaluate the movement of the molten metal in a simple crucible furnace: reading the papers from comsol ( www.comsol.asia/paper/download...3709/quintana_presentation.pdf , www.comsol.com/paper/download/83615/roy_paper.pdf )and from internet (www.comsol.eu/paper/download/14619/Ernst_pres.pdf) i understood that the ac/dc, the moving mesh ale and the turbulent flow k-epsi module should be used. in few hours i hope to start the project by myself, so in the way to let you have a look at it. In any case, if you have knowledge about how to set the solve processing , are well accepted
Thanks in advance
Gianmarco